Philippine Made Gear: GunsAmmo Venum-Style CIRAS Plate Carrier

By Diego

GunsAmmo, and its similar line of gear Red Viper are a braqnd that provides various types of tactical gear for the Filipino market, ranging from gun bags, EDC bags to copies of popular Filipino vest designs. Originating around early 2020, it seems that both Guns Ammo and Red Viper are made from the same tailors, and the names simply denote different product lines. For example, Red Viper seems to have the copy of the Venum 6094 cut carriers and the HSGI Woosatch chest rig, both of which are also copies of Venum’s iterations. Guns Ammo seems to focus on the JPC style vests, and the CIRAS style model as shown below.

Original Eagle CIRAS were spotted in some numbers with the Light Reaction Regiment, likely acquired in the late 2000s to early 2010s era. Then, local CIRAS copies started arriving around the early 2010s, seeing use initially with special forces units and to conventional forces wanting to private purchase or group purchase for the unit. Another point of contact for the Philippines’ CIRAS lineage is via the Serbian company UM Merkata. In 2012, the firm sent CIRAS clones as part of a contract that was not fulfilled in time for the Zamboanga Siege. At any rate, the earliest Filipino clones often followed the CIRAS pattern closer, just with regular front flap cummerbund closures and similar dimensions. Also, the quick release features and lumbar belt were almost never replicated.

Venum CIRAS Copy

These came about in the mid 2010s or so, before the GunsAmmo variant. Note QR skeletonized buckles on each shoulder strap, and the cummerbund closed on the side by hook and loop as well as two buckles.

All of the CIRAS style copies will feature boxier profile plate bags and an opening on the corners of the platebag, presumably for earlier square armor plates, as seen in an archival reference below. Over time, however, it seems that the Filipino copies did away with soft armor inserts and have pockets for hard armor plates only. Starting around the time the Venum variant of the CIRAS copy came about, additional changes were made. A quick release buckle would be found on each shoulder strap, and the cummerbund would be closed on each flank by hook and loop overlapping, and two buckles, mirroring the orientation of the Maritime CIRAS cummerbund.

GunsAmmo CIRAS variant. Note the distinct bright red and black branding patch, as well as the addition of a sheath and anchor point for the shoulder strap buckles. In the early 2020s, First Spear style Tubes started appearing on many Filipino gear brands.

Rear of the GunsAmmo CIRAS

The most distinct feature that sets Filipino and American CIRAS vests apart is the fact that the platebag on the FIlipino variants feed the armor plates from the top, and is then cinched down with additional straps inside, and closed by a small hook and loop section, as shown in the bototm of the photograph. Each side oddly also has internal drag handles, which strays from the original CIRAS drag handle designs.

Not much changes would appear until about the early 2020s, when the side cummerbund closures would mostly be produced with First Spear style Tube buckles. The GunsAmmo version, a copy of the Venum style CIRAS, retains many of the previous features, with the addition of using different color Cordura fabric, a more skeletonized cummerbund, and a sheath plus additional anchor points for the shoulder strap buckles. The GunsAmmo clones also utilize a full mesh lining as opposed to raised sections of mesh in the Venum versions. The build quality and fabric used seems less durable than the Venum iteration it copies, but is serviceable for the price nonetheless.

A large majority of Filipino gear designs have heritage that can trace its lineage to an original reference piece, and the CIRAS style vests are no exception. As per usual, mission and environment dictate gear, and a lesser threat of shrapnel and a greater emphasis on speed and breathability in a tropical country means a lot of the additonal weight and fabric, such as the soft armor insert and lumbar belt, are deleted from the Filipino copies.

Serbian made UM Merkata CIRAS vests. Note the square plate profile, quick release and lumbar belt seen on original CIRAS variants. An order was made in 2012 and most stayed in its Serbian warehouses, leading to emergency acquisitions for the 2013 Zamboanga Siege.

UM Merkata soft insert

Soft insert removed, plate bag pocket shown. The later Filipino CIRAS would ditch the bottom fed plate bag for a top fed one, holding only hard armor plates.

UM Merkata CIRAS tag.

Army SOCOM. Note the pre Venum CIRAS copy clone in use by the M67 operator. Opening on the corners of the platebag visible.

Infantryman using the Venum variant.

Proof of concept photo for an LRR and SOF short fan film

Diego Igama